We think you are in Rest of the World
Choose the country matching your desired destination.
See all countries

Care & Maintenance

METAL

All good things that are made to last need good care. Below we have gathered some of the most important recommendations concerning maintenance of GUBI products.

POWDER COATING

Powder coating is where a powder has been applied to the metal surface to create a smooth and hard finish.

LIQUID COATING

Liquid coating is where a coating has been applied through painting the metal surface, the surface is ground, then a layer of the liquid coat is applied on top.

CHROMA PLATING

Chrome plating is where a thin layer of chromium has been applied on top of a metal core through an electroplating procedure. This creates a chrome finish.

BLACK BRASS PLATING

Black brass is where a thin layer of black brass finish is applied on a raw metal surface through an electroplating procedure. The surface is then polished, and a black nickel plating is applied on top, finally, the surface is brushed. This process gives the material a black finish.

GUNMETAL

Gunmetal has a PVD coating applied on top of a brass plating. Brass plating is where a thin layer of brass is applied on a metal surface through an electroplating procedure. Gunmetal finish creates a dark, smooth, and matte effect.

POWDER COATING
CARE AND MAINTENANCE

Use a clean and soft cloth for daily cleaning.

Use a soft damp cloth to remove stains.

Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia.

Use only soft cloth for wiping and polishing, never use sponges or metal scrubs.

LIQUID COATING
CARE AND MAINTENANCE

Use a clean and soft cloth for daily cleaning.

Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia.

Use only soft cloth for wiping and polishing, never use sponges or metal scrubs.

CHROME PLATING
CARE AND MAINTENANCE

Chrome surfaces are resistant to dirt as well as liquids. Please note that you must be careful with water, as it can cause damage and the chrome to rust.

Chrome can be cleaned with a wrung-out cloth that has been immersed in a mild soapy water mixture. It can also be wiped with a cloth moistened with methylated spirits.

Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia.

Use only soft cloth for wiping and polishing, never use sponges or metal scrubs.

BRASS PLATING
CARE AND MAINTENANCE

Daily cleaning can be done by wiping with a clean dry cloth. Should the surface need more attention, this can be cleaned with water and a mild detergent or soap applied with a damp cloth. Wipe afterwards with a clean dry cloth.

Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia.

Use only soft cloth for wiping and polishing, never use sponges or metal scrubs.

BLACK BRASS PLATING
CARE AND MAINTENANCE

Wipe with a damp cloth soaked in warm water and a bit of mild detergent.

Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia.

Use only soft cloth for wiping and polishing, never use sponges or metal scrubs.

GUNMETAL
CARE AND MAINTENANCE

Wipe with a damp cloth soaked in warm water and a bit of mild detergent.

Do not use acidic or alkaline cleaning materials, glass cleaner or household ammonia.

Use only soft cloth for wiping and polishing, never use sponges or metal scrubs.

IMPORTANT NOTICE

The information included in these materials is guidance on the proper care and maintenance of GUBI products, but this guidance cannot be considered a guarantee of specific results. GUBI is not liable for any damage resulting from care and maintenance activities. Information from suppliers of chemicals and cleaning solvents, including but not limited to label instructions, should always be followed.

Customer service

Company

Professional resources

Follow us

GUBI A/S · +45 3332 6368 · CVR: 17940384 · Copyrights © 2024