Care & Maintenance

VENEER

Gubi’s products of veneered wood are made of real wood veneer attach to MDF (Medium Density Fiberboard). Given that the product is made of real wood, color and structure differences will occur naturally. Our veneer ensures a more even quality with a finer wood grain pattern and structural continuity, and a stable wooden top that would not warp.

LACQUERED

Gubi’s products of veneered wood are made of real wood veneer attach to MDF (Medium Density Fiberboard). Given that the product is made of real wood, color and structure differences will occur naturally

- American Walnut
- Ash
- Oak

CARE AND MAINTENANCE

Wipe with a clean, dry cloth or a wrung-out cloth that has been rinsed in clean water. Wipe in the direction of the wood grain. Dry immediately with a clean cloth.

Veneered products are protected by a clear lacquer but excessive use of water, or fluid left on the surface will penetrate the lacquer and result in damage to the veneer.

The veneer is only 0.6-1.2 mm thick, so do not try to sand the product.

Do not use abrasive cleaning.

The color of the product will change because of sunlight and light in general. We therefore recommend that you frequently move the things around that you have placed on the product, to ensure an even surface.

IMPORTANT NOTICE

The information included in these materials is guidance on the proper care and maintenance of GUBI products, but this guidance cannot be considered a guarantee of specific results. GUBI is not liable for any damage resulting from care and maintenance activities. Information from suppliers of chemicals and cleaning solvents, including but not limited to label instructions, should always be followed.